Official Rules
General
Rules
o
Drivers must be prompt to starting line
o
Driver get a restart if vehicle has failure within
first 30 feet
o
Must have helmet Snell 95 approved or DOT approved
in all classes
o
Must have a pull point on back of vehicle
o
Passengers allowed in class 1 and 2 only
o
All exhaust must be turned away from the spectators
o
Must have 3 trucks to make a class
o
Only the driver will get in free to an event, all
other are considered spectators and will pay the spectator fee
o
No NOS or alcohol hats unless competing in the DOT
Unlimited, Outlaw, or Tractor Tire class
o
If you are caught cheating in any class, you will be
disqualified from all tracks running these rules
o
Class 1 is 100% payback only
o
$35.00 entry fee for Class 1-Class 5, and Class 8
o
$50.00 entry fee for Outlaw and Tractor Tire Class
Class Breakdowns
Class #1--Street Stock
o
Must have mufflers
o
Must have all windows
o
OEM body, frame, and suspension matching
o
OEM transfer case
o
No pinion brakes
o
Fuel injection motors only on year models that are
factory equipped
o
Must wear seatbelt
o
Must be able to pass registration and inspection at
time of race (track owners discretion)
o
No nitrous or race fuel of any kind
Class #2
Modified Stock (0-35 DOT Tire Class)
o
500 C.I. limit (cannot be enforced unless cylinder
pump is available)
o
No sheet metal or tunnel ram intakes
o
No dominators or multiple carburetors
o
No injection, blower, turbo, or supercharge (unless
OEM stock)
o
No 4 links, slider or coil-overs (unless OEM stock)
o
36” traction bar allowed
o
Engine must be within 2” from centerline of the
front axle to the #1 side face of the head
o
OEM iron block and heads only
o
No aftermarket block or unconventional or aluminum
heads (only in factory OEM setup)
o
No Lenco, SCS, or power glides
o
Stall converter allowed
o
No trans-brakes, pinion brakes allowed
o
OEM frame only (no tube or home-made frames)
o
OEM vehicle body (no sheet metal bodies)
o
Fiberglass hoods allowed
o
Body trimming allowed on tire clearance only
o
Radiators and battery may be relocated, but not in
the cab (battery must be in a battery box
o
Mini trucks and SUV small block maximum
o
Full size trucks (small or big block)
o
No quick change transfer case or chain drives
o
No nitrous
o
Pump gas or race fuel only
Class #3 Super Modified (0-39.5 DOT Tires)
o
532 C.I. limit (cannot be enforced unless cylinder
pump is available)
o
Must have OEM body (gutting allowed)
o
Fiberglass front clips allowed
o
Carbureted alcohol allowed, no multiple carburetors
o
No chain drive
o
Pinion brakes allowed, must still have two working
brakes
o
U-joint shield required unless using pinion brakes
o
Drive shaft loops 1 per shaft located forward of
centerline of shaft
o
Kill switch located at drivers reach and at rear of
vehicle
o
No aluminum blocks, aftermarket blocks, or
unconventional heads (only in factory OEM setups)
o
No tunnel rams, injections or superchargers
o
Transmission blanket and flywheel shield required
unless SFI approved case
o
No 4-links suspension
o
OEM frame only (no modifications inside wheel base)
o
No coil overs
o
Engine must be within 6” from centerline of front
axle to the #1 side face of head
o
Seat must be within 84” of center of front axle to
rear of seat
Class #4 Pro Modified (0-54 DOT Tires)
o
609 C.I. limits (cannot be enforced unless cylinder
pump is available)
o
OEM frame only (no modifications inside wheel base)
o
OEM body vehicles only
o
Gutting allowed
o
Carbureted alcohol allowed
o
No chain drive
o
No 4-links suspension
o
Coil
overs allowed
o
Transmission blanket and flywheel shield required
unless SFI approved case
o
U-joint shield required unless using pinion brakes
o
Drive shaft loops 1 per shaft located forward of
centerline of shaft
o
Kill switches located at drivers reach and rear of
vehicle
o
No aluminum block or unconventional heads (only in
factory set up)
o
No multiple carburetors
o
No tunnel rams, injections, or superchargers
o
Engine must be within 6” from centerline of front
axle to the #1 side face of head
o
Seat must be within 84” of center of front axle to
rear of seat
Class #5 DOT
Unlimited
o
Must have vehicle appearing body
o
At least 6’ of OEM frame rails
o
DOT approved tires (no cuts, paddles, or tractor
tires)
o
Gutting allowed
o
Any engine and suspension
o
No blowers, turbo, or superchargers
o
Drive shaft loops 1 per shaft located forward of
centerline of shaft
o
Kill switch located beside driver and rear of
vehicle
o
U-joint shield required unless using pinion brake
o
Must wear fire suit if running alcohol or nitrous
o
No passengers
o
Must wear 5-point harness
o
Must wear a Snell 95 or DOT helmet
o
Hats and NOS allowed
Class #6 Open
Outlaw
o
Any tire allowed
o
No passengers
o
Must have a full roll cage
o
Must wear a fire suit
o
Must wear a Snell 95 or DOT helmet
o
Must have a 5-point harness
o
Must have a fire extinguisher at drivers reach
o
Buggies allowed
o
Windshield optional, however must wear a full face
helmet if no windshield
o
Must have a transmission blanket
o
Must have drive shaft loops on front and rear shaft
Class #7 Tractor Tire
o
No passengers
o
Must wear a 4-point safety harness
o
Must have a Snell 95 or DOT helmet
o
Must wear a fire suit
o
Must have a kill switch at drivers reach
o
Must have 4 tractor tires on vehicle
o
Must have a transmission blanket
o
Must have drive shaft loops on front and rear shaft
o
Must have 48” or taller tractor tires
Class #8 Trail Truck
o
Pump gas only
o
Charging system required
o
Cooling system required
o
Must be trail rated by track owner discretion
o
Can not enter race if you do not currently trail
ride your truck
For More Information Contact
Thomas @ 903-824-0862
